Monday 10 October 2022

Reading Maximum Power Transfer Theorem Problems In Practical

Reading Maximum Power Transfer Theorem Problems In Practical

In This Below Network, Our Aim To Find The Value Of Resistance At Load i.e, RL As Mentioned And Also Determine The Maximum Power Through Load Resistance RL By Using "Maximum Power Transfer Theorem".

Reading Maximum Power Transfer Theorem Problems In Practical
To Solve The Above Problem, We Will Follow Below Steps One By One:-
By Using The Definition Of "Maximum Power Transfer Theorem", As We Discussed The Load-Resistance Will Be Disconnected From The Circuits And The Point A & Point B Both The Ends Will Be Act As "Equivalent Resistance", For Which We Will Find The Answer By Using Our Previous Method Of Solving.

Now, After Removing Load-Resistance The Network Will Be Like As Below And We Will Solve This To Find "Equivalent Resistance".
(If You Miss To Learn, Kindly Have Revision By Reading Previous Posts)
Here Also Note That Voltage Source Will Be "Short-Circuited", Remember Current Source Will Be "Opened Circuited".
Now, Move Forward
Reading Maximum Power Transfer Theorem Problems In Practical

Reading Maximum Power Transfer Theorem Problems In Practical



Reading Maximum Power Transfer Theorem Problems In Practical

Hence, The Load Resistance/Equivalent Resistance Is "3.77 Ohms"

Now, We Need Voltage Across Point A & Point B. After This Only We Can Apply Direct "Maximum Power Transfer Theorem" Formula.

Now, For Maximum Power through Point A & Point B,  Need to Find Vo.c.
Here, Vo.c is known as "Voltage" between Open Circuits (Point A & Point B).
So, Next Steps Is:-

Reading Maximum Power Transfer Theorem Problems In Practical


By Applying "Kirchhoff's Voltage Law", We Can Easily Determine The Value Of Both Loop i.e, Loop 1 & Loop 2 As Shown In The Network As Above.
Applying "Kirchhoff's Voltage Law" in loop 1st:-
6-6I1-8I1+8I2=0
-14I1+8I2=-6         ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ (1)
Applying "Kirchhoff's Voltage Law" in loop 2nd:-
-8I2-5I2-12I2+8I1=0
8I1-25I2=0             ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ (2)
By Solving Equation (1) & Equation (2), We Will Get Answer:-
I1 = 0.524 A
I2 = 0.167 A
Now, From the Circuit Vo.c is
VA-5I2- V= 0
Vo.c/ VAB= 5I2 = 5X0.167 = 0.835v

So, the "Maximum Power Transfer" Through RL Will Be:-
Maximum Power Transfer


Trending Posts This Month:-

Solved Examples Problems On Star-Delta Transformation Or Conversion

Solved problem based on Norton’s Theorem

Solved Problem Based On Superposition Theorem

Example Solved Problems Based On Thevenin Theorem Circuit

Tricky Solutions For Equivalent Series-parallel Resistance Problems With Examples

Solved Problem Based On Maximum Power Transfer Theorem

Mesh-analysis - Loop-analysis -Maxwell's Current Analysis | Electrical

Delta To Star Transformation Or Delta To Star Conversion and Its Formulas

Superposition Theorem And Method Of Solving Superposition Theorem

Reading Problems Based On Superposition Theorem Example & Solved Formula's

No comments: